Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004TUNDRA 4WD V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLBRAKE DRUM
2004 Toyota Tundra 4WD V8-4.7L (2UZ-FE)
Brake Drum
2004 Toyota Tundra 4WD V8-4.7L (2UZ-FE)SECTION Brake Drum
MEASURE BRAKE DRUM INSIDE DIAMETER
Using brake drum gauge or equivalent, measure the inside diameter of the drum.
Standard inside diameter 295.0 mm (11.614 inch)
Maximum inside diameter 297.0 mm (11.693 inch)
If the drum is scored or worn, the brake drum may be lathed to the maximum inside diameter.
Using brake drum gauge or equivalent, measure the inside diameter of the drum.
Standard inside diameter 295.0 mm (11.614 inch)
Maximum inside diameter 297.0 mm (11.693 inch)
If the drum is scored or worn, the brake drum may be lathed to the maximum inside diameter.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.