SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 972 (SEAT SYSTEM)SECOND ROW SEAT BACK CUSHION/COVERREMOVAL
2004 Toyota Matrix XR, FWD, Standard

Second Row Seat Back Cushion/Cover: Removal

2004 Toyota Matrix XR, FWD, StandardSECTION Removal
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open liftgate.
  2. Remove liftgate sill scuff plate. (Refer to L1FTGATE SILL SCUFF PLATE ).
  3. Remove second row seat. (Refer to REMOVAL  ).
  4. Remove four screws and push pins attaching seat back panel.
  5. Push tabs and release handle and bezel assembly.
  6. Release handle and cable assembly.
  7. Remove two bolts attaching (on side of seat) seat back support arm.
  8. Remove side shield.
  9. Remove two bolts attaching outer seat back to hinge.
  10. Remove two bolts attaching inner seat back to hinge.
  11. Disengage J-straps (Fig 1 ).
    12. Fig 1: Removing Seat Back Cushion/Cover - Second Row
    G03571810Courtesy of DAIMLERCHRYSLER CORP.
  12. Remove seat back cover and cushion from seat back frame.
  13. Remove seat back cover from cushion.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.