Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 970 (BODY - INTERIOR)B-PILLAR UPPER TRIMINSTALLATION
2004 Toyota Matrix XR, FWD, Standard
B-Pillar Upper Trim: Installation
2004 Toyota Matrix XR, FWD, StandardSECTION Installation
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Insert seat belt through B-pillar trim and web guide (Figure).
- Place B-pillar trim cover in position on vehicle.
- Engage hidden clips attaching trim cover to B-pillar.
- Install shoulder belt bezel into trim cover.
- Install height adjuster knob.
- Install shoulder belt turning loop onto height adjuster. Tighten bolt to 39 N.m (29 ft. lbs.) torque.
- Place seat anchor in position on floor so webbing is pointed rearward and slightly outboard.
- Install bolt attaching lower seat belt anchor to floor. Tighten seat belt bolt to 39 N.m (29 ft. lbs.) torque.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.