Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Outlet: Description
This vehicle is equipped with four electrical power outlets. Two are located in the instrument panel center stack, one in the rear of the center console and one in the left quarter trim panel behind the rear seats.
One instrument panel and the center console outlet are battery powered - on at all times. The other outlets receive power only when the ignition is ON. The ignition powered instrument panel outlet will accept a cigar lighter element.
The operator can choose to make the ignition powered left rear quarter panel outlet battery powered by repositioning a fuse in the Integrated Power Module (IPM).
All outlets include tethered caps with ISO "battery" or "key" icons indicating whether they are battery or ignition powered.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.