SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 852 (DRIVER DOOR CONTROL SYSTEM - DIAGNOSIS)PROBLEM SYMPTOMS TABLEPOWER WINDOW CONTROL SYSTEM
2004 Toyota Matrix XR, FWD, Standard

Power Window Control System

2004 Toyota Matrix XR, FWD, StandardSECTION Power Window Control System
WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
POWER WINDOW SYMPTOM control SYSTEM

Symptom Suspect Area See Section
All the power window does not operate.
  1. Power source circuit
  2. Power window switch circuit
  3. Driver door ECU
  1. POWER SOURCE CIRCUIT 
  2. DTC B1221 POWER WINDOW SWITCH CIRCUIT ON DRIVER, DTC B1222 DOOR LOCK SWITCH CIRCUIT ON DRIVER DOOR 
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Driver side power window does not operate.
  1. Power window motor circuit
  2. Driver door ECU
  1. POWER WINDOW MOTOR CIRCUIT 
  2. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Jam protection function and auto up or down function does not operate.
  1. Jam protection limit switch circuit
  2. Jam protection pulse switch circuit
  3. Driver door ECU
  4. Theft deterrent ECU
  1. DTC B1231 JAM PROTECTION LIMIT SWITCH CIRCUIT ON DRIVER DOOR 
  2. DTC B1232 JAM PROTECTION PULSE SWITCH CIRCUIT ON DRIVER DOOR 
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
  4. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Window lock function does not operate.
  1. Power window switch circuit
  2. Driver door ECU
  1. DTC B1221 POWER WINDOW SWITCH CIRCUIT ON DRIVER, DTC B1222 DOOR LOCK SWITCH CIRCUIT ON DRIVER DOOR 
  2. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Remote control of all windows (Except driver side) does not operate with master switch. (Window operates normally with each of master switch.)
  1. Power window switch circuit
  2. Driver door ECU
  1. DTC B1221 POWER WINDOW SWITCH CIRCUIT ON DRIVER, DTC B1222 DOOR LOCK SWITCH CIRCUIT ON DRIVER DOOR 
  2. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
The key related power window operations cannot be done with driver door key cylinder. (Master switch operation is normal.)
  1. Door key lock and unlock switch circuit
  2. Inspect door lock control system
  3. Power window switch circuit
  4. Driver door ECU
  1. DOOR KEY LOCK AND UNLOCK SWITCH CIRCUIT 
  2. INSPECTION
  3. DTC B1221 POWER WINDOW SWITCH CIRCUIT ON DRIVER, DTC B1222 DOOR LOCK SWITCH CIRCUIT ON DRIVER DOOR 
  4. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Power window does not operate with keyless entry transmitter. (Windows operate normally with master switch.)
  1. Inspect wireless door lock control system
  2. Replace driver door ECU
  3. Theft deterrent ECU
  1. INSPECTION
  2. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Window moves down without being ordered during the up operation.
  1. Jam protection limit switch circuit
  2. Power window motor circuit
  3. Is the window regulator installed correctly?
  4. Driver door ECU
  1. DTC B1231 JAM PROTECTION LIMIT SWITCH CIRCUIT ON DRIVER DOOR 
  2. POWER WINDOW MOTOR CIRCUIT 
  3. -
  4. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.