SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 852 (DRIVER DOOR CONTROL SYSTEM - DIAGNOSIS)PROBLEM SYMPTOMS TABLEPOWER DOOR LOCK CONTROL SYSTEM
2004 Toyota Matrix XR, FWD, Standard

Power Door Lock Control System

2004 Toyota Matrix XR, FWD, StandardSECTION Power Door Lock Control System
WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
POWER DOOR LOCK CONTROL SYSTEM

Symptom Suspect Area See Section
All the doors can not be locked or unlocked.
  1. Power source circuit
  2. Theft deterrent ECU
  3. Driver door ECU
  1. POWER SOURCE CIRCUIT 
  2. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Driver side door lock does not operate.
  1. Door lock motor circuit
  2. Driver door ECU
  3. Theft deterrent ECU
  1. DOOR LOCK MOTOR CIRCUIT 
  2. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Door key related function cannot be done.
  1. Door lock switch circuit
  2. Door courtesy light and courtesy switch circuit
  3. Theft deterrent ECU
  4. Driver door ECU
  1. DOOR KEY LOCK AND UNLOCK SWITCH CIRCUIT 
  2. DOOR COURTESY LIGHT AND COURTESY SWITCH CIRCUIT 
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
  4. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Key confinement prevention function does not operate.
  1. Door courtesy light and courtesy switch circuit
  2. Door unlock detection switch circuit
  3. Theft deterrent ECU
  4. Driver door ECU
  1. DOOR COURTESY LIGHT AND COURTESY SWITCH CIRCUIT 
  2. DOOR UNLOCK DETECTION SWITCH CIRCUIT 
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
  4. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.