Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 84 (AIR BAG RESTRAINT SYSTEMS)TORQUE SPECIFICATIONS
2004 Toyota Matrix XR, FWD, Standard
Torque Specifications
2004 Toyota Matrix XR, FWD, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Air bag sensor assembly Torx screws | 15 (20) | |
| Front air bag sensor mounting bolt | 15 (20) | |
| Passenger-side air bag module mounting nuts & bolts | 15 (20) | |
| Seat back mounting bolts | 32 (43) | |
| Front seat belt | ||
| Buckle mounting nut | 31 (42) | |
| Pretensioner/retractor lower mounting bolt | 30 (41) | |
| upper and lower anchor bolts | 30 (41) | |
| Seat cushion mounting bolts | 14 (19) | |
| Seat track mounting bolts | 27 (37) | |
| Side air bag sensor assembly mounting bolts | 15 (20) | |
| Steering column intermediate shaft | ||
| Bolts "A" & "B" | 26 (35) | |
| Steering column mounting nuts | 19 (25) | |
| Steering wheel mounting nut | 37 (50) | |
| INCH Lbs. (N.m) | ||
| Driver-side air bag module retaining screw | 78 (8.8) | |
| Seat belt pretensioner/retractor upper mounting bolt | 65 (7.4) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.