SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 838 (REAR RIGHT SEAT CONTROL SYSTEM - DIAGNOSIS)PROBLEM SYMPTOMS TABLE
2004 Toyota Matrix XR, FWD, Standard

Problem Symptoms Table

2004 Toyota Matrix XR, FWD, StandardSECTION Problem Symptoms Table
WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
PROBLEM SYMPTOMS

Symptom Suspect Area See Section
Rear right side power seat system does not operate.
  1. ECU power source circuit
  2. Rear seat switch circuit
  3. Rear RH seat, ECU
  1. CIRCUIT INSPECTION 
  2. REAR SEAT CONTROL SWITCH CIRCUIT
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
"Slide operation" does not operate.
  1. Rear seat switch circuit
  2. Motor circuit
  3. Position sensor circuit
  4. Rear RH seat ECU
  1. REAR SEAT CONTROL SWITCH CIRCUIT
  2. SLIDE POWER SEAT MOTOR CIRCUIT 
  3. SLIDE POSITION SENSOR CIRCUIT 
  4. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
"Headrest operation" does not operate.
  1. Rear seat switch circuit
  2. Motor circuit
  3. Headrest limit switch circuit
  4. Position sensor circuit
  5. Rear RH seat ECU
  1. REAR SEAT CONTROL SWITCH CIRCUIT
  2. HEADREST MOTOR AND POSITION SENSOR CIRCUIT 
  3. HEADREST LIMIT SWITCH CIRCUIT 
  4. HEADREST MOTOR AND POSITION SENSOR CIRCUIT 
  5. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Seat position memory function does not operate.
  1. Rear seat switch circuit
  2. Rear seat memory switch
  3. Position sensor circuit
  4. Rear left seat control ECU
  5. Rear Door RH ECU
  1. REAR SEAT CONTROL SWITCH CIRCUIT
  2. REAR SEAT MEMORY SWITCH CIRCUIT (W/ MEMORY)
  3. SLIDE POSITION SENSOR CIRCUIT 
  4. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
  5. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Seat position return function does not operate.
  1. Rear seat switch circuit
  2. Rear seat turn switch circuit
  3. Rear RH seat ECU
  4. Passenger side J/B ECU
  1. REAR SEAT CONTROL SWITCH CIRCUIT
  2. REAR SEAT RETURN SWITCH CIRCUIT
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
  4. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Door open return function does not operate.
  1. Rear seat switch circuit
  2. Door courtesy switch circuit
  3. Rear RH seat ECU
  1. REAR SEAT CONTROL SWITCH CIRCUIT
  2. DOOR COURTESY LIGHT AND COURTESY SWITCH CIRCUIT
  3. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
Vibration seat function does not operate.
  1. Rear seat switch circuit
  2. Vibration seat ECU communication circuit
  3. Vibration circuit
  4. Rear RH seat ECU
  1. REAR SEAT CONTROL SWITCH CIRCUIT
  2. VIBRATION SEAT ECU COMMUNICATION CIRCUIT 
  3. VIBRATION CIRCUIT 
  4. HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.