On-Vehicle Inspection

2004 Toyota Matrix XR, FWD, StandardSECTION On-Vehicle Inspection
WARNING: This page is about a different car, the 2003 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT SPEEDOMETER 
    1. Check the operation.
      1. Using a speedometer tester, inspect the speedometer allowable indication error and check the operation of the odometer.

        USA (mph): 

        Fig 1: Standard Indication Specification Chart (USA (mph)
        G01328193Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        CANADA (km/h): 

        Fig 2: Standard Indication Specification Chart CANADA (km/h)
        G01328194Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.