Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 796 (AIR CONDITIONING)CONDENSER FANINSTALLATION
2004 Toyota Matrix XR, FWD, Standard
Condenser Fan: Installation
2004 Toyota Matrix XR, FWD, StandardSECTION Installation
WARNING: This page is about a different car, the 2004 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL COOLING FAN
- Install the cooling fan with the 6 bolts.
- Torque: 5.0 N.m (50 kgf.cm, 44 in.lbf)
- Connect the upper radiator hose to the radiator.
- Connect the ECM outlet duct to the ECM box.
- Connect the wire for cooling fan to clamp on the cooling fan.
- Connect the 2 cooling fan connectors.
- Connect the radiator reservoir hose to the radiator.
- Install the cooling fan with the 6 bolts.
- INSTALL AIR CLEANER AND MAF METER ASSEMBLY
- INSTALL AIR CLEANER INLET
- FILL WITH ENGINE COOLANT
- START ENGINE AND CHECK FOR COOLANT LEAKS
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.