SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 792 (AUTOMATIC TRANSMISSION)FLOOR SHIFT ASSEMBLYREMOVAL
2004 Toyota Matrix XR, FWD, Standard

Floor Shift Assembly: Removal

2004 Toyota Matrix XR, FWD, StandardSECTION Removal
WARNING: This page is about a different car, the 2004 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. SEPARATE NO. 1 FLOOR SHIFT GEAR SHIFTING ROD 
    1. Shift into the N position.
    2. Remove the nut and separate the No. 1 floor shift gear shifting rod from the connecting rod swivel.
      3. Fig 1: Separating No. 1 Floor Shift Gear Shifting Rod
      G00894505Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE CONSOLE BOX ASSEMBLY (See  REMOVAL  ) 
    1. Remove the console upper panel.
    2. Remove the box bottom mat.
    3. Remove the parking brake hole cover assembly.
    4. Remove the console box assembly.
  3. REMOVE FLOOR SHIFT LEVER ASSEMBLY 
    1. Remove the 4 bolts.
    2. Disconnect the 2 connectors.
    3. Remove the floor shift lever assembly.
    Fig 2: Removing Floor Shift Lever Assembly
    G00894506Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.