Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Door Lock Control System: Inspection
- INSPECT FRONT DOOR W/MOTOR LOCK ASSY RH
- Inspect the door lock motor operation.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If operation is not as specified, replace the door lock assembly.
- Inspect the position switch continuity.
Standard:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the continuity is not as specified, replace the door lock assembly.
- Inspect the door lock motor operation.
- INSPECT FRONT DOOR W/MOTOR LOCK ASSY LH
- Inspect the door lock assembly continuity.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the continuity is not as specified, replace the door lock assembly.
- Inspect the door lock motor operation.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the operation is not as specified, replace the door lock assembly.
- Inspect the position switch continuity.
Standard:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the continuity is not as specified, replace the door lock assembly.
- Inspect the door lock assembly continuity.
- INSPECT REAR DOOR W/MOTOR LOCK ASSY RH
- Inspect the door lock motor operation.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the operation is not as specified, replace the door lock assembly.
- Inspect the position switch continuity.
Standard:
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the continuity is not as specified, replace the door lock assembly.
- Inspect the door lock motor operation.
- INSPECT REAR DOOR W/MOTOR LOCK ASSY LH
- Inspect the door lock motor operation.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the operation is not as specified, replace the door lock assembly.
- Inspect the position switch continuity.
Standard:
- Inspect the door lock motor operation.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.