Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 759 (AUTOMATIC TRANSAXLE (ON-VEHICLE SERVICE))TRANSMISSION CONTROL CABLE ASSYREPLACEMENT

2004 Toyota Matrix XR, FWD, Standard

Transmission Control Cable ASSY: Replacement

2004 Toyota Matrix XR, FWD, StandardSECTION Replacement

WARNING: This page is about a different car, the 2004 Lexus ES 330. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSY (SEE REPLACEMENT )
REMOVE AIR CONDITIONING RADIATOR ASSY (SEE OVERHAUL )
REMOVE AIR BAG SENSOR ASSY CENTER (SEE REMOVAL & INSTALLATION )
REMOVE BATTERY
REMOVE AIR CLEANER ASSY
REMOVE AIR CLEANER HOSE NO. 1
REMOVE INTAKE AIR RESONATOR SUB-ASSY
REMOVE TRANSMISSION CONTROL CABLE ASSY
1. Remove the nut from the control shaft lever.
2. Disconnect the control cable from the control shaft lever.
  
  Fig 1: Removing Nut From Control Shaft Lever
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the clip and disconnect the control cable from the control cable bracket.
  
  Fig 2: Removing Clip And Disconnecting Control Cable From Control Cable Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disconnect the control cable from the control cable clamp.
  
  Fig 3: Disconnecting Control Cable From Control Cable Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Disconnect the floor shift cable from the rod of the floor shift assy.
  
  Fig 4: Disconnecting Floor Shift Cable From Rod Of Floor Shift Assy
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Remove the 2 bolts and shift cable grommet retainer No. 2.
7. Pull out the control cable from the body.
  
  Fig 5: Removing 2 Bolts And Shift Cable Grommet
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMISSION CONTROL CABLE ASSY
1. Put in the control cable to the body.
2. Install the shift cable grommet retainer No. 2 to the floor shift cable.
3. Install the floor shift cable, as shown in the illustration.
  HINT:
  
  Install it with the uneven surface facing up.
  
  Fig 6: Installing Transmission Control Cable Assy
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the shift cable grommet retainer No. 2 with the bolts.
  Torque: 4.9 N.m (50 kgf.cm, 43 in.lbf)
  
  Fig 7: Installing Shift Cable Grommet Retainer No. 2 With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Connect the control cable to the control cable clamp.
  
  Fig 8: Connecting Control Cable To Control Cable Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Temporarily install the control cable to the control shaft lever with nuts.
  
  Fig 9: Installing Control Cable To Control Shaft Lever With Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Install the control cable and a new clip to the bracket.
  
  Fig 10: Installing Control Cable And New Clip To Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INTAKE AIR RESONATOR SUB-ASSY
INSTALL AIR CLEANER HOSE NO. 1
INSTALL AIR CLEANER ASSY
INSTALL AIR BAG SENSOR ASSY CENTER (SEE REMOVAL & INSTALLATION )
INSTALL AIR CONDITIONING RADIATOR ASSY (SEE OVERHAUL )
INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSY (SEE REPLACEMENT )
INSTALL BATTERY
ADJUST SHIFT LEVER POSITION (SEE ADJUSTMENT )
INSPECT SHIFT LEVER POSITION (SEE ADJUSTMENT )