SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 730 (AUTOMATIC TRANSAXLE - DIAGNOSIS)DATA LIST/ACTIVE TESTDATA LIST
2004 Toyota Matrix XR, FWD, Standard

Data List

2004 Toyota Matrix XR, FWD, StandardSECTION Data List
WARNING: This page is about a different car, the 2004 Lexus ES 330. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

According to the DATA LIST displayed by the OBD II scan tool or hand-held tester, you can read the value of the switch, sensor, actuator and so on without parts removal. Reading the DATA LIST as the first step of troubleshooting is one method to shorten labor time.

  1. Warm up the engine.
  2. Turn the ignition switch off.
  3. Connect the OBD II scan tool or hand-held tester to the DLC3.
  4. Turn the ignition switch to the ON position.
  5. Push the "ON" button of the OBD II scan tool or the hand-held tester.
  6. When you use hand-held tester:

    Select the item "DIAGNOSIS/ENHANCED OBDII/DATA LIST".

  7. According to the display on tester, read the "DATA LIST".
    Fig 1: Identifying Diagnostic Chart
    G01435415Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.