Circuit Description

2004 Toyota Matrix XR, FWD, StandardSECTION Circuit Description
WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

If the AUTO UP/DOWN function does not operate, the cause may be one or more of the following:

  • The recorded power window fully closed position, which is stored in the power window regulator master switch assembly, was erased as a result of:

    1) the PWR fuse or the power window relay (PWR) being replaced;

    or

    2) the battery cable and the master switch connector being disconnected.

  • The master switch has a malfunction.
  • The pulse sensors in the driver side power window regulator motor have a malfunction.
  • The wiring between the master switch and the driver side power window regulator motor is open or short circuited.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.