Inspection Procedure

2004 Toyota Matrix XR, FWD, StandardSECTION Inspection Procedure
WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK NAVIGATION SYSTEM SETTING 
    1. Enter the "MENU" screen by pressing the "MENU" switch.
    2. Enter the volume adjustment screen by pressing the "Volume" switch.
      Fig 1: Entering Volume Adjustment Screen
      G03049614Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Check that "OFF" is not selected.

      OK: OFF is not selected. 

      Fig 2: Checking OFF Is Not Selected
      G03049615Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. NG: TURN VOICE GUIDANCE VOLUME UP TO 4 USING VOICE ADJUSTMENT SWITCHES 
    2. OK: Go to Next Step. 
  2. CHECK NAVIGATION SETTING 
    1. Enter the "MENU" screen by pressing the "MENU" switch.
    2. Enter the "Setup" screen by pressing the "Setup" switch.
      Fig 3: Entering "SETUP" Screen
      G03049616Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Check that "Auto Voice Guidance" is not OFF.

      OK: Auto voice guidance is ON. 

    4. Check that "Voice Guidance in All Modes" is not OFF.

      OK: Voice guidance in all modes is ON. 

      Fig 4: Checking "Voice Guidance In All Modes" Is Not OFF
      G03049617Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. NG: TURN AUTO VOICE GUIDANCE TO "ON" 
    2. OK: Go to Next Step. 
  3. CHECK MAP DISC 
    1. Check that the map disc is not deformed or cracked.

      OK: No deformations or cracks appear on the map disc. 

    Fig 5: Checking Map Disc Is Not Deformed Or Cracked
    G03049618Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. NG: REPLACE MAP DISC 
    2. OK: Go to Next Step. 
  4. CHECK RADIO AND NAVIGATION ASSY 
    1. Check if audio sound can be heard from the driver's side speaker.

      OK: Audio sound can be heard. 

    1. NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (SEE  PROBLEM SYMPTOMS TABLE  ) 
    2. OK: REPLACE RADIO AND NAVIGATION ASSY (SEE  REPLACEMENT  ) 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.