Inspection Procedure

2004 Toyota Matrix XR, FWD, StandardSECTION Inspection Procedure
WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK RADIO AND NAVIGATION ASSY 
    1. Check for foreign matter or obstructions caught in the moving parts of the panel.

      OK: No obstruction or foreign matter is found. 

      Fig 1: Checking Radio & Navigation Assy
      G03049584Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. NG: REMOVE ANY OBSTRUCTION OR FOREIGN MATTER FOUND 
    2. OK: Go to Next Step. 
  2. OPERATION CHECK 
    1. Check if the navigation and audio systems function properly.

      OK: Navigation and audio systems function properly. 

    1. OK: REPLACE RADIO AND NAVIGATION ASSY (SEE  REPLACEMENT  ) 
    2. NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (SEE  PROBLEM SYMPTOMS TABLE  ) 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.