SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 673 (INSTRUMENT PANEL/METER)COMBINATION METER ASSYOVERHAUL
2004 Toyota Matrix XR, FWD, Standard

Combination Meter ASSY: Overhaul

2004 Toyota Matrix XR, FWD, StandardSECTION Overhaul
WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

COMPONENTS: See COMPONENTS 

  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL (See  REPLACEMENT  ) 
  2. REMOVE COMBINATION METER ASSY 
    1. Remove the 2 screws and disengage the 2 clips.
    2. Disconnect the connectors and remove the combination meter assy.
      Fig 1: Removing Combination Meter Assy
      G02891157Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE COMBINATION METER GLASS 
    1. Reverse the combination meter and remove the 2 screws.
    2. Remove the tape.
    3. Disengage the 7 claws and remove the combination meter glass.
      Fig 2: Removing Combination Meter Glass
      G02891158Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.