Wiper Rubber LH: Replacement

2004 Toyota Matrix XR, FWD, StandardSECTION Replacement
WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FR WIPER BLADE LHΒ 
    1. Remove the FR wiper blade LH from the front wiper arm LH.
    NOTE: Do not fold down the front wiper arm with the front wiper blade being removed from it.
  2. REMOVE WIPER RUBBER LHΒ 
    1. Remove the FR wiper rubber LH from the FR wiper blade LH.
    2. Remove the 2 wiper rubber backing plates from the wiper rubber LH.
  3. INSTALL WIPER RUBBER LHΒ 
    1. Install the 2 wiper rubber backing plates to the wiper rubber LH.
      NOTE: Be careful to observe and keep direction of curvature for correct replacement.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.