Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 665 (POWER STEERING)PRECAUTION

2004 Toyota Matrix XR, FWD, Standard

Section 665 (Power Steering): Precaution

2004 Toyota Matrix XR, FWD, StandardSECTION Precaution

WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

HANDLING PRECAUTIONS ON STEERING SYSTEM
1. Care must be taken to when replacing parts. Incorrect replacement could affect the performance of the steering system and result in a driving hazard.
2. 1MZ-FE/3MZ-FE engine has 2 types of vane pump assy.
HINT:

TYPE A VANE PUMP:

Vane pump pulley can be removed from the vane pump shaft (See COMPONENTS ).

TYPE B VANE PUMP:

Vane pump pulley cannot be removed from the vane pump shaft (See COMPONENTS ).

Fig 1: Identifying 2 Types Of Vane Pump Assy
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HANDLING PRECAUTIONS ON SRS AIRBAG SYSTEM
1. The CAMRY is equipped with SRS (Supplemental Restraint System) such as the driver airbag and front passenger airbag. Failure to carry out service operation in correct sequence could cause the SRS to unexpectedly deploy during servicing, possibly leading to a serious accident. Before servicing (including removal or installation of parts, inspection or replacement), be sure to read the precautionary notice for the supplemental restraint system (see AIR BAG RESTRAINT SYSTEMS ).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.