Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 614 (AUTOMATIC TRANSMISSION (SPECIFICATIONS))TORQUE SPECIFICATION
2004 Toyota Matrix XR, FWD, Standard
Torque Specification
2004 Toyota Matrix XR, FWD, StandardSECTION Torque Specification
WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
Automatic Transmission / Transaxle Service Torque Specification
| Part tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Park/neutral position switch | Bolt | 6.9 | 70 | 61 in..lbf |
| Nut | 5.4 | 55 | 48 in..lbf | |
| Control shaft lever x Control shaft (U241E) | 12.7 | 130 | 9 | |
| Shift control cable x Control shaft lever (U241E) | 14.7 | 150 | 10 | |
| Control shaft lever x Control shaft (U151E) | 13 | 130 | 9 | |
| Shift control cable x Control shaft lever (U151E) | 15 | 150 | 10 | |
| Transaxle housing x Engine block (U241E) | ||||
| A bolt | 64 | 653 | 47 | |
| B bolt | 46 | 470 | 34 | |
| C bolt | 44 | 449 | 32 | |
| Transaxle housing x Engine block (U151E) | ||||
| A bolt | 64 | 653 | 47 | |
| B bolt | 46 | 470 | 34 | |
| C bolt | 44 | 449 | 32 | |
| Torque converter clutch x Drive plate | 41 | 418 | 30 | |
| Engine mounting bracket FR x Transaxle | 64 | 653 | 47 | |
| Oil filler tube x Transaxle | 5.5 | 56 | 49 in..lbf | |
| Control cable bracket x Transaxle (U241E) | 11.8 | 122 | 9 | |
| Control cable bracket x Transaxle (U151E) | 12 | 122 | 9 | |
| Oil cooler tube clamp x Control cable bracket | 5.4 | 55 | 48 in..lbf | |
| Oil cooler inlet tube x Transaxle (U241E) | 34.3 | 350 | 25 | |
| Oil cooler outlet tube x Transaxle (U241E) | 34.3 | 350 | 25 | |
| Oil cooler inlet tube x Transaxle (U151E) | 34 | 350 | 25 | |
| Oil cooler outlet tube x Transaxle (U151E) | 34 | 350 | 25 | |
| Starter x Transaxle | 37 | 377 | 27 | |
| Starter wire x starter | 9.8 | 100 | 87 in..lbf | |
| Wire harness x Transaxle (U241E) | 25.5 | 260 | 19 | |
| Wire harness x Transaxle (U151E) | 26 | 260 | 19 | |
| Control cable clamp x Transaxle | 12 | 122 | 9 | |
| Wire harness clamp x Transaxle | 8.4 | 86 | 74 in..lbf | |
| Speed sensor x Transaxle | 11.3 | 115 | 8 | |
| Revolution sensor x Transaxle (U241E) | 11.3 | 115 | 8 | |
| Revolution sensor x Transaxle (U151E) | 11 | 115 | 8 | |
| Speed sensor x Transaxle (U151E) | 11 | 115 | 8 | |
| Drain plug x Oil pan | 49 | 500 | 36 | |
| Transmission wire x Transaxle | 5.4 | 55 | 48 in..lbf | |
| ATF temperature sensor x Valve body | 6.6 | 67 | 58 in..lbf | |
| Oil pan x Transaxle | 7.8 | 80 | 69 in..lbf | |
| Solenoid valve x Valve body (U241E) | A bolt | 6.6 | 67 | 58 in..lbf |
| B bolt | 11 | 110 | 8 | |
| Solenoid valve x Valve body (U151E) | A bolt | 6.6 | 67 | 58 in..lbf |
| B bolt | 11 | 110 | 8 | |
| Valve body x transaxle (U241E) | 10.8 | 110 | 8 | |
| Valve body x transaxle (U151E) | 11 | 110 | 8 | |
| Oil strainer x Valve body (U241E) | 10.8 | 110 | 8 | |
| Oil strainer x Valve body (U151E) | 11 | 110 | 8 | |
| Floor shift assy x Body (U241E) | 11.8 | 122 | 9 | |
| Floor shift assy x Body (U151E) | 12 | 122 | 9 | |
| Control cable x Body | 4.9 | 50 | 43 in..lbf | |
| Transmission case cover lower x Automatic transaxle (U151E) | 12 | 122 | 9 | |
| Flywheel housing under cover x Automatic transaxle (U151E) | Bolt | 7.8 | 80 | 69 in..lbf |
| Nut | 21 | 214 | 16 | |
| Air cleaner x Air cleaner hose | 5.0 | 51 | 44 in..lbf | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.