Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 571 (FOG LIGHT SYSTEM)INSPECTION
2004 Toyota Matrix XR, FWD, Standard
Section 571 (Fog Light System): Inspection
2004 Toyota Matrix XR, FWD, StandardSECTION Inspection
WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FOG LIGHT SWITCH CONTINUITY FOG LIGHT SWITCH CONTINUITY SPECIFICATIONS
Switch Position Tester Connection Specified Condition OFF - No Continuity ON 10 - 11 Continuity If continuity is not as specified, replace the switch.
- INSPECT FOG LIGHT RELAY CONTINUITY FOG LIGHT RELAY CONTINUITY SPECIFICATIONS
Condition Tester Connection Specified Condition Constant 1 - 2 Continuity Constant 3 - 5 No Continuity Apply B+ Between Terminals 1 And 2. 3 - 5 Continuity If continuity is not as specified, replace the relay.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.