Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 557 (STEERING COLUMN SHIFT ASSEMBLY)REMOVAL
2004 Toyota Matrix XR, FWD, Standard
Section 557 (Steering Column Shift Assembly): Removal
2004 Toyota Matrix XR, FWD, StandardSECTION Removal
WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE STEERING COLUMN ASSEMBLY (See REMOVAL ).
- REMOVE PARKING LOCK CABLE ASSEMBLY
- Remove the screw and parking lock cable No. 2.
- Using a torx socket wrench, remove the 2 screws and parking lock cable No. 1.
- Remove the spring.
- Remove the 2 bolts and parking lock cable housing.
- REMOVE SHIFT LEVER
- Disconnect the connector.
- Using a torx socket wrench, remove the torx screw and shift lever.
- Remove the upper No. 2 steering column cover.
- REMOVE SHIFT LEVER HOUSING
Using a torx socket wrench, remove the 3 torx screws and shift lever housing.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.