Section 53 (Electrical Component Locator): Connectors

2004 Toyota Matrix XR, FWD, StandardSECTION Connectors
WARNING: This page is about a different car, the 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTORS LOCATION

Component Component Location
BA1 (White, 10 Pin) At front side of personal light.
BB1 (White, 13 Pin) At left center pillar.
BC1 (White, 13 Pin) At right center pillar.
BD1 (White, 4 Pin) Under driver's seat.
BE1 (White, 4 Pin) Under front passenger's seat.
BF1 (White, 13 Pin) Under left rear seat.
BG1 (Black, 2 Pin) At left rear of roof.
BG2 (Blue, 6 Pin) At left rear of roof.
BG3 (White, 10 Pin) At left rear of roof.
EA1 (3.0L) (Dark Gray, 4 Pin) At right side of cylinder head. See Figure.
EB1 (2.4L) (Gray, 6 Pin) At front side of engine room J/B. See Figure.
EB1 (3.0L) (Gray, 6 Pin) At front side of engine room J/B. See Figure.
EB2 (2.4L) (Gray, 8 Pin) At front side of engine room J/B. See Figure.
EB2 (3.0L) (Gray, 8 Pin) At front side of engine room J/B. See Figure.
E6 Behind upper left instrument panel
E8 Behind upper left instrument panel
IA1 (White, 20 Pin) At left kick panel.
IA2 (White, 12 Pin) At left kick panel.
IB1 (Gray, 7 Pin) At left kick panel.
IB2 (White, 14 Pin) At left kick panel.
IC1 (White, 3 Pin) At left kick panel.
IC2 (White, 13 Pin) At left kick panel.
IC3 (White, 22 Pin) At left kick panel.
ID1 (White, 10 Pin) At left kick panel.
IE1 (White, 8 Pin) Near bottom left front pillar.
IF1 (White, 4 Pin) At right side of instrument panel J/B.
IF2 (White, 10 Pin) At right side of instrument panel J/B.
IF3 (White, 20 Pin) At right side of instrument panel J/B.
IG1 (White, 2 Pin) At upper portion of right dash brace.
IH1 (White, 3 Pin) At upper portion of right dash brace.
II1 (White, 6 Pin) At upper portion of right dash brace.
IJ1 (White, 6 Pin) At upper portion of right dash brace.
IK1 (Yellow, 4 Pin) At right kick panel.
IK2 (White, 22 Pin) At right kick panel.
IK3 (White, 13 Pin) At right kick panel.
IL1 (White, 22 Pin) At upper side of passenger side J/B.
IL2 (White, 7 Pin) At upper side of passenger side J/B.
IM1 (White, 20 Pin) At right kick panel.
IN1 (Gray, 7 Pin) At right kick panel.
IN2 (White, 14 Pin) At right kick panel.
IO1 (White, 13 Pin) At right kick panel.
IO2 (White, 18 Pin) At right kick panel.
IP1 (Blue, 13 Pin) At left side of passenger side J/B.
IP2 (White, 14 Pin) At left side of passenger side J/B.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.