WIRELESS DOOR LOCK: w/ Smart Entry System Table

2004 Toyota Matrix XR, FWD, StandardSECTION WIRELESS DOOR LOCK: w/ Smart Entry System Table
WARNING: This page is about a different car, the 2004 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
WIRELESS DOOR LOCK W/ SMART ENTRY SYSTEM

Display (item) Default Contents Setting
OPEN DOOR WARN (Open door warning) ON If door is not completely closed and transmitter LOCK switch is pressed, this function makes buzzer sound for 10 seconds. ON/OFF
WIRLS BUZZ OPER (Buzzer answer-back of wireless) ON Function that makes wireless buzzer sound for answer-back when transmitter lock/unlock switch is pressed. ON/OFF
WIRELESS OPER (Wireless door lock control function) ON Function that turns wireless door lock function ON/OFF. ON/OFF
ALARM FUNCTION (Panic function) ON Function that operates theft deterrent system when transmitter panic switch on transmitter is held for 0.8 seconds. ON/OFF
UNLOCK/2OPER (2 times operation wireless unlock) ON Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If on OFF setting, pressing unlock switch once makes all doors unlock. ON/OFF
AUTO LOCK DELAY (Auto lock time) 30s This function controls amount of time from unlocking doors to automatic re-locking function. 30s/60s
HAZARD ANS BACK (Hazard answer-back of wireless) ON When lock switch on transmitter is pressed, this function illuminates all hazard warning lamps once. when unlock switch is pressed, all hazard warning lamps illuminate twice. ON/OFF
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.