Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 507 (INTRODUCTION)REPAIR INSTRUCTIONCUSTOMIZE PARAMETERSILLUMINATED ENTRY
2004 Toyota Matrix XR, FWD, Standard
Illuminated Entry
2004 Toyota Matrix XR, FWD, StandardSECTION Illuminated Entry
WARNING: This page is about a different car, the 2004 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
CUSTOMIZE PARAMETERS OF ILLUMINATED ENTRY
| DISPLAY (ITEM) | DEFAULT | CONTENTS | SETTING |
|---|---|---|---|
| LIGHTING TIME | 15 s | Changes the lighting time after closing the doors (the light quickly fades out when the ignition switch is turned on). | 7.5 s / 15 s / 30 s |
| I/L AUTO OFF | ON | Function to turn off the interior light automatically after specified time for prevent the battery loss when the interior light switch is "DOOR" position and the door is open. | ON / OFF |
| I/L ON/UNLOCK | ON | Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. | ON / OFF |
| I/L ON/ACC OFF | ON | Illuminates the interior light when the ignition switch is turned from the ACC to LOCK position. | ON / OFF |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.