Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 49 (MANUAL A/C-HEATER SYSTEMS)COOLING UNITREMOVAL
2004 Toyota Matrix XR, FWD, Standard
Cooling Unit: Removal
2004 Toyota Matrix XR, FWD, StandardSECTION Removal
WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- Discharge refrigerant from refrigeration system.NOTE: At the time of installation, please refer to the following item: Evacuate air from refrigeration system.
Charge system with refrigerant and inspect for leakage of refrigerant.
- Specified amount: 600 +/- 50 g (21.16 +/- 1.76 oz.)
- Disconnect liquid tube.
- Using SST, remove the piping clamp.
SST 09870-00025 (Liquid tube)
- Insert SST to piping clamp.NOTE: Confirm the direction of the piping clamp claw and SST using the illustration showing on the caution label.
- Insert SST to piping clamp.
- Using SST, remove the piping clamp.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.