Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 46 (ENGINE CONTROLS - REMOVAL, OVERHAUL & INSTALLATION)FUEL SYSTEMFUEL PUMPINSTALLATION (LX470)
2004 Toyota Matrix XR, FWD, Standard
Installation (LX470)
2004 Toyota Matrix XR, FWD, StandardSECTION Installation (LX470)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Install fuel pump in fuel tank using a NEW gasket. Tighten fuel pump retaining plate-to-fuel tank bolts to specification. See TORQUE SPECIFICATIONS .
- Ensure fuel supply and fuel return lines and connections on fuel pump are clean. Install fuel supply line and fuel return line on fuel pump. Install retaining clip on fuel supply line and fuel return line until "click" sound is heard. Lightly pull on retaining clips to ensure retaining clips are properly locked on the fuel pump. To install remaining components, reverse removal procedure. Check for fuel leaks.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.