Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 413 (STEERING SYSTEM)POWER STEERING GEARREASSEMBLY
2004 Toyota Matrix XR, FWD, Standard
Power Steering Gear: Reassembly
2004 Toyota Matrix XR, FWD, StandardSECTION Reassembly
WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When using a vise, do not overtighten it.
- Coat parts indicated by arrows with power steering fluid or molybdenum disulfide lithium base grease . See Figure and Figure .
- Install oil seal
:
- Coat a new oil seal lip with power steering fluid.
- Using SST, press in the oil seal.NOTE:
- Make sure to install the oil seal facing in the correct direction.
- Take care that the oil seal does not get reversed as you install it.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.