Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 368 (AIR BAG RESTRAINT SYSTEMS)REMOVAL & INSTALLATIONPASSENGER-SIDE AIR BAG MODULEREMOVAL
2004 Toyota Matrix XR, FWD, Standard
Passenger-Side Air Bag Module: Removal
2004 Toyota Matrix XR, FWD, StandardSECTION Removal
WARNING: This page is about a different car, the 2004 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Remove bolts from glove box door hinge and remove glove box. Remove 4 Torx bolts retaining passenger-side air bag module to instrument panel. See Figure.
- Lift air bag module out of instrument panel and disconnect connector from harness. Remove air bag module from vehicle. If air bag module is to be replaced, record serial number.
NOTE:
If air bag module is being replaced, record bar code of air bag modules on air bag information sticker.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.