SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 356 (AUTOMATIC TRANSMISSION SERVICING)LUBRICATIONFLUID CAPACITIES
2004 Toyota Matrix XR, FWD, Standard

Fluid Capacities

2004 Toyota Matrix XR, FWD, StandardSECTION Fluid Capacities
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
TRANSAXLE FLUID CAPACITIES

Application Refill - Qts. (L) Dry Fill - Qts. (L)
Transaxle (2) 4.0 (3.8) 9.7 (9.2)
AWD Power Transfer Unit 1.05 (1.0) 1.05 (1.0)
(1) Approximate quantities listed.
(2) Add specified amount of fluid. Start engine and allow it to idle for at least one minute. With brakes applied, shift transaxle through all gear ranges and return to Park. Add additional fluid to bring level to 1/8" below ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level to within HOT range on dipstick.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.