Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
CANCEL Switch
Canceling The Preset Speed - See also MANUAL CANCELLING MECHANISM and AUTO CANCEL FUNCTION under DESCRIPTION .
You can cancel the preset speed by:
- Pulling the lever in the cancel direction and releasing it. See Figure.
- Depressing the brake pedal.
If the vehicle speed falls blow about 25 mph. (40 Km/h), the preset speed will automatically cancel out.
If the vehicle speed drops 10 mph (16 Km/h) below the preset speed, the preset speed will also automatically cancel out.
If the preset speed automatically cancels out other than for the above cases, manufacture suggests having vehicle checked by a dealer.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.