SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 346 (FRONT SUSPENSION)TORQUE SPECIFICATIONS
2004 Toyota Matrix XR, FWD, Standard

Torque Specifications

2004 Toyota Matrix XR, FWD, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Caliper-To-Steering Knuckle Bolts 125 (169)
Engine Cradle Mounting Bolt 120 (163)
Hub & Bearing
Axle Hub Nut 180 (244)
Mounting Bolt 48 (65)
Lower Ball Joint Nut (1)
Lower Control Arm-To-Frame Bolt 120 (163)
Stabilizer Bar
Bar Link Nut 65 (88)
Cushion Retainer Bolt 40 (54)
Retainer-To-Frame Bolt 44 (60)
Strut
Body/Tower Mounting Nut 13 (18)
Clevis-To-Knuckle Nut (2)
Shaft Retainer Nut 85 (115)
Tie Rod End Stud Nut (3)
Wheel Lug Nuts 100 (135)
Wheel Speed Sensor Bracket Screw 13 (18)
(1) Tighten nut to 60 ft. lbs. (81 N.m), then tighten nut an additional 1/4 (90 degree) turn.
(2) Tighten nut to 65 ft. lbs. (88 N.m), then tighten nut an additional 1/4 (90 degree) turn.
(3) Tighten nut to 35 ft. lbs (47 N.m), then tighten nut an additional 1/2 (180 degree) turn.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.