Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 264 (AIR BAG RESTRAINT SYSTEMS)TORQUE SPECIFICATIONS
2004 Toyota Matrix XR, FWD, Standard
Torque Specifications
2004 Toyota Matrix XR, FWD, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Air bag sensor assembly mounting screws | 15 (20) |
| Front air bag sensor mounting bolts | 15 (20) |
| Passenger-side air bag module bolts | 15 (20) |
| Seat back assembly bolts | 32 (43) |
| Seat belt floor anchor bolts | 30 (41) |
| Seat belt shoulder anchor bolts | 31 (42) |
| Seat track bolts | 27 (37) |
| Side air bag sensor screws | 15 (20) |
| Steering wheel retaining nut | 26 (35) |
| INCH Lbs. (N.m) | |
| Driver-side air bag module screws | 78 (8.8) |
| Front seat air bag door bolts | 42 (4.7) |
| Passenger-side air bag module nuts | 48 (5.4) |
| Pretensioner upper bolt | 69 (7.8) |
| Rear seat back mounting bolts | 115 (13.0) |
| Side air bag module nuts | 49 (5.5) |
| Side curtain air bag module bolts | 87 (9.8) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.