Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 247 (ENGINE CONTROLS REMOVAL & INSTALLATION)TORQUE SPECIFICATIONS
2004 Toyota Matrix XR, FWD, Standard
Torque Specifications
2004 Toyota Matrix XR, FWD, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Charcoal Canister | 15 (20) |
| Engine Control Module | 10 (13) |
| Fuel Delivery Pipe Sub-Assembly | 16 (21) |
| Fuel Pipe Sub-Assembly No. 1 | 29 (39) |
| Fuel Pressure Pulsation Damper | 29 (39) |
| Fuel Tank Band Bolts | 30 (40) |
| Fuel Tank Protector | 15 (20) |
| Heated Oxygen Sensor | 33 (44) |
| Intake Manifold | 13 (18) |
| Knock Sensor | 33 (45) |
| Spark Plug | 13 (18) |
| Throttle Body | 13 (18) |
| Vacuum Switching Valve Assembly | 13 (18) |
| Ventilation Valve | 20 (27) |
| INCH Lbs. (N.m) | |
| Accelerator Pedal Rod Assembly | 44 (5) |
| Camshaft Position Sensor | 66 (7.5) |
| Crankshaft Position Sensor | 58 (6.5) |
| Engine Cover | 66 (7.5) |
| Fuel Pipe Sub-Assembly No. 3 | 66 (7.5) |
| Fuel Pressure Regulator | 66 (7.5) |
| Ignition Coil | 66 (7.5) |
| Oil Cooler Pipe Bolt & Nut | 66 (7.5) |
| Speed Sensor | 73 (8.3) |
| Timing Belt Cover | 66 (7.5) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.