Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 206 (CRUISE CONTROL)DESCRIPTION & OPERATIONSYSTEM OUTLINEAUTO CANCEL FUNCTION
2004 Toyota Matrix XR, FWD, Standard
Auto Cancel Function
2004 Toyota Matrix XR, FWD, StandardSECTION Auto Cancel Function
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
If any of the following conditions is encountered, the cruise control is automatically cancelled.
- The stop light switch wiring is faulty or short-circuited.
- The vehicle speed signal is faulty.
- In case of over current to the transistor, driving motor, or electromagnetic clutch.
- When the vehicle has stopped due to voltage decrease.
- When the vehicle speed falls below the minimum speed limit (approximately 25 mph, 40 km/h).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.