Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 203 (POWER SEATS)SYSTEM TESTSPOWER SEATS - WITH DRIVING POSITION MEMORY
2004 Toyota Matrix XR, FWD, Standard
Power Seats - With Driving Position Memory
2004 Toyota Matrix XR, FWD, StandardSECTION Power Seats - With Driving Position Memory
WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM INDEX (POWER SEATS - WITH DRIVING POSITION MEMORY)
| Problem | Perform Test |
|---|---|
| All Manual & Return Functions Do Not Operate | TEST NO. 8 |
| Only One Manual Or Return Function Does Not Operate | TEST NO. 9 |
| One Or All Manual Functions Do Not Operate | TEST NO. 10 |
| Memory Function Does Not Operate | TEST NO. 11 |
| Return Function Does Not Stop When Brake Pedal Is Depressed | TEST NO. 12 |
| All Return Functions Do Not Operate Or Operate A Little, Then Stop | TEST NO. 13 |
| One Return Function Does Not Operate Or Operates A Little, Then Stops | TEST NO. 14 |
| Power Outside Rearview Mirror Does Not Operate | TEST NO. 15 |
| Power Outside Rearview Mirror Operates Abnormally | TEST NO. 16 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.