Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 193 (WIPER/WASHER SYSTEMS)ADJUSTMENTSFRONT WIPER ARMS
2004 Toyota Matrix XR, FWD, Standard
Front Wiper Arms
2004 Toyota Matrix XR, FWD, StandardSECTION Front Wiper Arms
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
Adjust the installation positions of the wiper arms to the positions shown in the illustration. See Fig 1.
- A
Approximately 1.713 in. (43.5 mm) - B
Approximately 1.909 in. (48.5 mm) - C
Approximately 0.610 in. (15.5 mm) - D
Approximately 23.62 in. (600 mm) - E
Approximately 1.697 in. (43.1 mm) - F
Approximately 20.67 in. (525 mm) - G
Approximately 1.81 in. (46 mm)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.