Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 171 (ANTI-THEFT SYSTEMS)PROGRAMMINGANTI-THEFT SYSTEMSETTING SYSTEM
2004 Toyota Matrix XR, FWD, Standard
Setting System
2004 Toyota Matrix XR, FWD, StandardSECTION Setting System
WARNING: This page is about a different car, the 2002 Lexus GS 430 and 2002 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition key to the LOCK position and remove it. The engine immobilizer system causes the indicator light to flash.
- Close and lock all the doors, trunk and hood using an ignition key or wireless remote control. The flashing indicator light will remain on when all the doors, trunk and hood are closed and locked.
- After 30 seconds, the indicator starts flashing and the system is set.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.