Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 165 (POWER WINDOWS)SYSTEM TESTSTEST C: KEY RELATED POWER WINDOW OPERATION DOES NOT OPERATE WITH DRIVER SIDE DOOR KEY CYLINDER (MASTER SWITCH OPERATION IS NORMAL)
2004 Toyota Matrix XR, FWD, Standard
Test C: Key Related Power Window Operation Does Not Operate With Driver Side Door Key Cylinder (Master Switch Operation Is Normal)
2004 Toyota Matrix XR, FWD, StandardSECTION Test C: Key Related Power Window Operation Does Not Operate With Driver Side Door Key Cylinder (Master Switch Operation Is Normal)
WARNING: This page is about a different car, the 2002 Lexus GS 430 and 2002 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
For Test C, see TEST C: KEY RELATED POWER WINDOW OPERATION DOES NOT OPERATE WITH DRIVER SIDE DOOR KEY CYLINDER (MASTER SWITCH OPERATION IS NORMAL) table.
TEST C: KEY RELATED POWER WINDOW OPERATION DOES NOT OPERATE WITH DRIVER SIDE DOOR KEY CYLINDER (MASTER SWITCH OPERATION IS NORMAL)
| Trouble | Suspect Area | ||||
|---|---|---|---|---|---|
| Door Lock System Does Not Operate With Door Key | (1) | ||||
| Door Lock System Does Not Operate With Door Key | Fail-Safe Mode Caused By Error On Jam Protection Sensor Of Power Window (Operation Of Power Window With Multi-Function Transmitter Is Prohibited) HINT: DTC 31-38 Output (2) | ||||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.