Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 161 (STEERING COLUMN SWITCHES)DESCRIPTION & OPERATIONIGNITION SWITCHIGNITION SWITCH OPERATION
2004 Toyota Matrix XR, FWD, Standard
Ignition Switch Operation
2004 Toyota Matrix XR, FWD, StandardSECTION Ignition Switch Operation
WARNING: This page is about a different car, the 2003 Lexus GS 430, 2003 Lexus GS 300, 2002 Lexus GS 430, and 2002 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
- START - Starter motor on. The key will return to the ON position when released.
- ON - Engine on and all accessories on. This is the normal driving position.
- ACC - Accessories such as the radio operate, but the engine is off. If you leave the key in the ACC or LOCK position and open the driver's door, a buzzer will remind you to remove the key. The volume or interval of the beep sound can be changed.
- LOCK - Engine is off and the steering wheel is locked. The ignition key can be removed only at this position. To turn the key from ACC to the LOCK position, you must put the transmission selector lever in the P position. Once you remove the key, the engine immobilizer system is automatically set. When starting the engine, the key may seem stuck at the LOCK position. To free it, first be sure the key is pushed all the way in, and then rock the steering wheel slightly while turning the key gently.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.