Roof Console Box Assembly

2004 Toyota Matrix XR, FWD, StandardSECTION Roof Console Box Assembly
WARNING: This page is about a different car, the 2003 Lexus ES 300 and 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the moon roof motor switch continuity. See INSPECTING MOON ROOF MOTOR SWITCH CONTINUITYΒ  table. See Fig 1.
  2. If continuity is not as specified, replace the roof console box. See step Β 16 under REMOVAL & INSTALLATION of ROOF HEADLINING ASSEMBLY.
INSPECTING MOON ROOF MOTOR SWITCH CONTINUITY

Switch Position Tester Connection Specified Condition
CLOSE/UP 2 & 4 Continuity
OPEN/DOWN 1 & 4 Continuity
Fig 1: Identifying Moon Roof Motor Switch Terminals
G00182508Courtesy of Β© TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.