Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Resetting To A Faster Speed
Press the control lever upward in the RES/ACC direction and hold it. Release the lever when the desired speed is attained. While the lever is held upward, the vehicle will gradually gain speed. When the difference between the actual vehicle speed and the set speed is less than 3 mph (5 km/h), the set speed can be increased 1 mph (1.6 km/h) each time by pressing the control lever upward in the RES/ACC direction quickly. However, a quicker way to reset is to accelerate the vehicle and then press the control lever downward in the SET/COAST direction.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.