Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 152 (POWER SEATS)REMOVAL & INSTALLATIONPOSITION CONTROL ECU ASSEMBLYREMOVAL
2004 Toyota Matrix XR, FWD, Standard
Position Control Ecu Assembly: Removal
2004 Toyota Matrix XR, FWD, StandardSECTION Removal
WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
- Remove power seat switch. See POWER SEAT SWITCH .
- Disconnect the connectors. Remove the left hand front seat inner belt assembly.
- Remove the 3 screws. See Fig 1. Disengage the claws. Remove the left hand inner front seat cushion shield.
- Remove the 2 screws. Remove the left hand inner No. 1 front seat cushion shield.
- Disconnect the clamps and connectors of each wiring harness. Remove the 4 bolts. Remove the front seat cushion assembly.
- Disconnect the connector. Remove the 2 bolts. Remove the position control ECU assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.