Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Conditions For Memorized Position Activation
- Ignition key ON and selector lever in P position.
- Ignition switch off and within 30 seconds of opening driver's door.
If any driving position memory switch is pushed while one of the memorized driving position profiles is being activated, the operation will stop. To activate the system, push the desired button (1 or 2) again.
The driving position memory control system cannot be operated while the vehicle is moving. If the vehicle's battery is disconnected, the computer's memory will be erased and the memorized positions will have to be set again.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.