SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 119 (ENGINE CONTROLS (REMOVAL & INSTALLATION))FUEL SYSTEMFUEL PRESSURE REGULATORREMOVAL & INSTALLATION (ES300)
2004 Toyota Matrix XR, FWD, Standard

Removal & Installation (ES300)

2004 Toyota Matrix XR, FWD, StandardSECTION Removal & Installation (ES300)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Lexus SC 430, 2003 Lexus RX 300, 2003 Lexus LX 470, 2003 Lexus LS 430, and 2003 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.

Remove fuel pump assembly from fuel tank. See FUEL PUMP . Remove screw and in-tank fuel filter. See Figure. Remove "O" ring from in-tank fuel filter. Remove screw and fuel pressure regulator. Remove "O" ring from fuel pressure regulator. To install, reverse removal procedure. Apply a light coat of gasoline to NEW "O" ring. Check for fuel leaks.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.