Clock ASSY: Replacement

2004 Toyota Matrix XR, FWD, StandardSECTION Replacement
WARNING: This page is about a different car, the 2004 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

  • Installation is in the reverse order of removal.
  • SEE :COMPONENTS 
  1. REMOVE INSTRUMENT PANEL REGISTER ASSY No. 1 (SEE  REPLACEMENT  ) 
  2. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER (SEE  REPLACEMENT  ) 
  3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY UPPER (SEE  REPLACEMENT  ) 
  4. REMOVE INSTRUMENT PANEL REGISTER ASSY No. 3 (SEE  REPLACEMENT  ) 
  5. REMOVE INSTRUMENT PANEL REGISTER ASSY No. 4 (SEE  REPLACEMENT  ) 
  6. REMOVE MULTI-DISPLAY ASSY (SEE  REPLACEMENT  ) 
  7. REMOVE CLOCK ASSY 
    1. Disengage the 2 claws and then remove the clock assy.
    Fig 1: Removing Clock Assy
    G00934465Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.