Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESPECIFICATIONSENGINE FUEL SYSTEM (SERVICE SPECIFICATIONS)SERVICE DATA
2004 Toyota Matrix XR, FWD, Standard
Service Data
2004 Toyota Matrix XR, FWD, StandardSECTION Service Data
Fuel System Service Data
| Fuel pressure | at idle | 304 - 343 kPa (3.1 - 3.5 kgf/cm2 , 44 - 50 psi) |
| Fuel injector assy | ||
| Resistance | at 20°C (68°F) | 13.4 - 14.2Ω |
| Injection volume | 1ZZ-FE | 60 - 73 cm3 (3.7 - 4.5 cu in.) per 15 seconds |
| 2ZZ-GE | 77 - 94 cm3 (4.7 - 5.7 cu in.) per 15 seconds | |
| Difference between each injector | 1ZZ-FE | 13 cm3 (0.8 cu in.) or less |
| 2ZZ-GE | 17 cm3 (1.0 cu in.) or less | |
| Fuel drop | 1 drop or less per 12 minutes | |
| Fuel pump | ||
| Resistance | at 20°C (68°F) | 0.2 - 3.0 Ω |
| Compression spring | ||
| Free length (FF) | Front side | 43 mm (1.6929 in.) |
| Rear side | 40 mm (1.5748 in.) | |
| Free length (4WD) | 40 mm (1.5748 in.) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.