Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004MATRIX XR, FWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEFUEL DELIVERYENGINE FUEL SYSTEMFUEL SYSTEMINSPECTION
2004 Toyota Matrix XR, FWD, Standard
Fuel System: Inspection
2004 Toyota Matrix XR, FWD, StandardSECTION Inspection
- FUEL INJECTOR ASSY
- Inspect injector resistance.
- Using an ohmmeter, measure the resistance between the terminals.
- Resistance: 13.4 - 14.2 Ω at 20°C (68°F)
- Using an ohmmeter, measure the resistance between the terminals.
- Inspect injector inspectionCAUTION: Keep injector clear of sparks during the test.
- Purchase a new fuel tube, and take out the fuel tube connector from its tube.NOTE: Part No. 23901-0D010
- Purchase a new fuel tube, and take out the fuel tube connector from its tube.
- Inspect injector resistance.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.