SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004CELICA GT, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 83 (ENGINE CONTROLS - SERVICE & ADJUSTMENT SPECIFICATIONS)IGNITION SYSTEMFIRING ORDER
2004 Toyota Celica GT, Standard

Firing Order

2004 Toyota Celica GT, StandardSECTION Firing Order
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Lexus SC 430, 2003 Lexus RX 300, 2003 Lexus LX 470, 2003 Lexus LS 430, and 2003 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
FIRING ORDER

Application Firing Order
ES300 & RX300 (1) (2) 1-2-3-4-5-6
GS300 & IS300 (3) 1-5-3-6-2-4
GS430, GX470, LS430, LX470 & SC430 (1) (4) 1-8-4-3-6-5-7-2
(1) System uses a Distributorless Ignition System (DIS) with ignition coil for each cylinder.
(2) Cylinder No. 1 is front cylinder on right side of engine when viewed from flywheel end of engine. Cylinder No. 2 is front cylinder on left side of engine when viewed from flywheel end of engine. Cylinders No. 1, 3 and 5 are on right side of engine. Cylinders No. 2, 4 and 6 are on left side of engine.
(3) System uses a Distributorless Ignition System (DIS) with 3 ignition coils. Each coil fires 2 cylinders. Cylinders are paired as follows: No. 1-6, 2-5, and 3-4.
(4) Cylinder No. 1 is front cylinder on left side of engine when viewed from flywheel end of engine. Cylinder No. 2 is front cylinder on right side of engine when viewed from flywheel end of engine. Cylinders No. 1, 3, 5 and 7 are on left side of engine. Cylinders No. 2, 4, 6 and 8 are on right side of engine.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.